Compuprint MDP40B User Manual
Page 42
38
Setup Parameter
Values
Description
AUTO GAP OFFSET
-0,075 mm, -0.050 mm,
-0.025 mm, +0.000 mm,
+0.025 mm, +0.050 mm,
+0.075 mm, +0.100 mm
Sets the automatic gap offset to one of the given values.
GET EDGE QUOTE
0/2”, 1/2”, 2/2”, 3/2”, 4/2”,
5/2”, 6/2”, 7/2”
Sets the position in which the left paper edge is checked. If
set to 0, the check is performed at the first line. The other
values correspond to the physical distance from the first
line.
PROGRAM 1
PROGRAM 2
Setup Parameter
Values
Description
PROTOCOL
EPSON 570, IBM X24E,
X24E AGM, IBM 2390,
OLI. PR40+, OLI. PR2,
OLI. PR2845, IBM 4722,
IBM 9068
Defines the printer protocol.
NOTE: For the IBM 4722 and 9068 protocols, if the
software driver uses the controlled link of the IBM financial
driver, set the
INTERFACE TYPE
item in the Configuration
Menu to
financial
.
FONT
Draft, Courier, OCR-B,
Gothic, Prestige, Present,
OCR-A, Script, Boldface
Selects the font.
HORIZONTAL PITCH
10 cpi, 12 cpi, 15 cpi,
16.6 cpi, 17.1 cpi, 20 cpi
Selects the character spacing in characters per inch (cpi).
VERTICAL PITCH
5 lpi, 6 lpi, 8 lpi
Selects the line spacing in lines per inch (lpi).