Compuprint MDP40B User Manual
Page 41
37
Setup Parameter
Values
Description
PASSBOOK LENGTH
auto
setup
Selects the passbook length setting mode.
Selecting
auto
the length of the passbook is read and set
automatically by the printer, independently from the passbook length
set by menu or software command.
Selecting
setup
the length of the passbook is set by the user in the
menu or by means of a software command. This selection allows a
particularly accurate printing and is especially useful when printing on
passbooks with horizontal fold.
The values range between 99 and 210 mm.
To set the values combine the numbers considering that the first line
corresponds to the hundreds, the second line to the tens and the third
line to the units. See the example below.
Example:
How to set the passbook length to 150 mm:
PASSBOOK LENGTH
(
(
setup
( ) auto
0 1 2 3 4 5 6 7 8 9
( )
(
(
(
)
( )
( )
( )
( )
( )
(
(
( )
( )
( )
( )
(
(
( )
( )
( )
( )
( )
( )
( )
( )
( )