Compuprint 9050 LAN Installation - Manual (Page 52)

52 78413025-001
Configurin
ADDTCPRTE
to create a route
if the printer is somewhere other
d Host Name
host
you will run the CFGTCO
command.
Confi
Although it is y, it is
suggested that you take this step. Add the AS/400 name and
the LAN IP address to the “Host Table Entries”.
g a Router Definition with
If necessary, use the ADDTCPRTE command
definition. This is required
than on a local segment.
Configuring a Local Domain an
The AS/400 print commands require a local name and
name. If you have already configured LAN attached TCP/IP
printers on the AS/400 system, you will have a local domain
name and hostname configured on the system.
To configure the local domain,
guring a TCP/IP Host Table Entry
optional to create a TCP/IP host table entr