Compuprint 2056 - Manual (Page 6)

User Manual Compuprint 2056
MAN10xxx-01 iv
Overview
First thanks for purchasing this Compuprint printer.
Your printer is a 24-pin 80-column dot matrix printer, offering a wide range of features and
multiple functions. It can be widely used in tax, mail, telecom, police, hospital, insurance,
finance, stock, customhouse, cabaret, aviation and transport etc.
Printer Features:
 Install print paper easily
The design of this printer makes you install paper rapidily and save your time.
 Tear off function
This causes tractor paper to be automatically fed to the tear-off position at the edge of the
window cover, for easy tear-off at the perforations after printing. This zero tear-off capability
helps eliminate paper wastage.
 Facility switch between cut sheet and tractor paper
Feed the tractor paper back to the installing position through LOAD/EJECT key on the
control panel, pull the paper select lever to the cut-sheet position. Insert the cut-sheet from
front to print. If you want to use tractor paper again, pull the paper select lever back to the
tractor paper position after cut-sheet printing. Then press LOAD/EJECT key, tractor paper
may be fed to the printer again.
 Eject function
The function allows the user eject the tractor paper through the facility key on the control
panel.
 Select the data transfer interface function automatically
The printer configures with a parallel interface, two USB interfaces, a serial interface or an
Ethernet interface (Please take the specific interface as standard). Connect the printer to
the computer with the correct cables. The printer would switch to the correct interface
according to the received data type automatically.
 Emulation
The printer supports the Epson ESC/PK2 and IBM 2391 emulations as standard.
 Pin break compensation function
User can set the printer to print using the pin which is in good condition to compensate the
break pin.
 Pin rotation replacement function
User can set pins to switch while printing form transverse line in order to improve print
head’s life.