Compuprint 2056 - Manual (Page 12)

User Manual 2056
MAN10xxx-01 4
Ribbon knob
Ribbon nip Ribbon guide slice
Print head
7. Turn the ribbon knob in the direction of the arrow to remove any slack from the ribbon so
it is easier to install.
8. Slide the print head from side to side several times to make sure the ribbon core is
installed in the right place.
9. Please put the gap adjust lever to the original place and close the window after the
ribbon cartridge is installed.
Figure 1-6 Install ribbon
Note: 1. When your printing becomes faint, you need to replace the ribbon
cartridge. Otherwise, the print quality would be affected and the print
head may be damaged.
2. To remove the old ribbon cartridge, first make sure the power is turned
off, move the print head to the center of the printer. Then hold both
sides of the ribbon cartridge and lift it out of the printer. Install a new
one follow the above steps.
3. Please use the Compuprint PRKN120 ribbon cartridge only.
Manufacturer will not honor warranty when using unauthorized ribbon
cartridge.