Code Blue CB 4-S SIGNATURE WALL/POLE MOUNT ENCLOSURE - Manual (Page 26)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-160-C page 26 of 45
CB 4 Series
Administrator Guide
Suggested installation dimensions shown from ground to lower right mounting hole are for single button face-
plates.
• For dual button faceplate, deduct 3.25 inches.
• For keypad faceplate, deduct 4.5 inches.
• For wheelchair direct facing access only, deduct 6 inches.
DISCLAIMER: The dimensions above are intended as guidelines only. For specific installation requirements,
reference your local codes.
All wiring must be installed and connected by experienced and certified personnel to meet
local and national electrical codes, and will include a service disconnect.
40-1/4
14 REF
5 3/4
GROUND/FLOOR
4 X Ø9/16 MOUNTING HOLES
25 3/4 REF
9 1/8 REF
4 1/8 REF
8
1 5/8
MOUNTING SURFACE
Ø1-1/8 THRU BOTTOM PLATE
(KNOCKOUT FOR 3/4 CONDUIT)
2 1/2
8 7/8 REF
BOTTOM PLATE
2 7/8
1 5/8 REF
Ø1-1/8 THRU TOP PLATE
(KNOCKOUT FOR Ø3/4 CONDUIT)
BOTTOM