Code Blue CB 4-S SIGNATURE WALL/POLE MOUNT ENCLOSURE - Manual (Page 22)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-160-C page 22 of 45
CB 4 Series
Administrator Guide
14 CB 4-r Installation Instructions
1.0 PRE-INSTALLATION
1.1 Electrical preparation – The unit may have supply wires run from either A) behind the unit
through the wall, or B) below the unit using an external conduit through the bottom of the unit.
Holes in the back and bottom of the unit have been provided for this purpose.
2.0 INSTALLATION PROCEDURES
2.1 Mark the mounting holes – In order to comply with the Americans with Disabilities Act (ADA)
of 1990, the speakerphone button(s) should be positioned between 34 and 48 inches from
grade level (Consult an ADA specialist in your area to verify local and federal guidelines).
2.2 Drill all marked holes.
2.3 Secure the housing to the wall – Four anchors of appropriate size and type should be used
to securely fasten the housing to the wall or pole mount.
IMPORTANT: If wiring is coming in from the back, ensure that the conduit is aligned at this time.
2.4 Connect electrical and communications wiring. Follow all federal and local codes that apply.
See diagrams next page
15-1/4
10-1/4
6
5-3/4
8
2-3/4
4-1/16
GR
AP
HIC