Code CR2300 - Manual (Page 13)

13
D014276_02_CR2300_User_Manual
18.0 - Charging Station Dimensions
3.3"
(83 mm)
4.5"
(115 mm)
2.4"
(60 mm)
84.99 ± 0.20 mm
66.50 mm
117 mm 66.80 mm
32 mm
32 mm
0
0
3
BURR DIRECTION
Printing Mark (white color)
THIS SIDE DOWN
7.43
16.57
56
83.98
8.90
8X Ø 5.11 THRU ALL
\/ Ø 9.78 X 82º
4X Ø 10.50 ± 0.40
WIDTH 0.50 mm
4X Ø 3.30 3
M4X0.7 - 6HX 3
19.0 - CR2300 Maintenance
The CR2300 device needs only a minimum of maintenance to operate. A few tips are given below for maintenance suggestions.
Cleaning the CR2300 Window
CR2300 window should be clean to allow the best performance of the device. The window is the clear plastic piece inside the head of the
reader. Do not touch the window. Your CR2300 uses CMOS technology that is much like a digital camera. A dirty window may stop the
CR2300 from reading barcodes.
If the window becomes dirty, clean it with a soft, non-abrasive cloth or a facial tissue (no lotions or additives) that has been moistened with
water. A mild detergent may be used to clean the window, but the window should be wiped with a water moistened cloth or tissue after using
the detergent.
Technical Support and Returns
For returns or technical support visit www.codecorp.com/codesupport.php.