Code CR2300 - Manual (Page 11)

11
D014276_02_CR2300_User_Manual
13.0 - Reading Ranges
CR2300 Performance
Test Barcode Min Inches (mm) Max Inches (mm)
4 mil Code 39 1.6” (40 mm) 3.1” (78 mm)
7.5 mil Code 39 1.3” (34 mm) 7.2” (182 mm)
9.5 mil Code 128 0.6” (15 mm) 8.3” (212 mm)
10.5 mil UPC 0.8” (20 mm) 9.0” (228 mm)
13 mil UPC 1.1” (28 mm) 11.0” (280 mm)
5 mil Data Matrix 1.7” (43 mm) 3.0” (76 mm)
6.3 mil Data Matrix 1.3” (33 mm) 4.1” (104 mm)
10 mil Data Matrix 0.8” (20 mm) 6.5” (165 mm)
20.8 mil Data Matrix 1.1” (28 mm) 13.5” (343 mm)
Note: All samples were high quality barcodes and were read along a physical center line at a 10° angle. Default AGC settings were used.
Accuracy= +/- 10%.
14.0 - Symbologies Defaulted On 15.0 - Symbologies Defaulted Off
The following are symbologies that have a default of ON.
To turn symbologies on or off, scan the symbology barcodes
located in the CR2300 Configuration Guide located on our
website at http://www.codecorp.com.
Aztec
Codabar
Code 39
Code 93
Code 128
Data Matrix
Data Matrix Rectangle
The following are symbologies that have a default of OFF.
To turn symbologies on or off, scan the symbology barcodes
located in the CR2300 Configuration Guide located on our
website at http://www.codecorp.com.
Codablock F
Code 11
Code 32
Composite
Data Matrix Inverse
Han Xin Code
Hong Kong 2 of 5
IATA 2 of 5
Maxicode
Matrix 2 of 5 All GS1 DataBar
Interleaved 2 of 5
PDF417
QR Code
UPC/EAN/UPC-E Micro PDF417
MSI Plessey
NEC 2 of 5
Pharmacode
Plessey
Straight 2 of 5
Telepen
Trioptic
Postal Codes