Cloud Electronics RH-8c User Manual

Page 9

RH-8 Installation Guide

RJ45 connection

If the RH-8 is to be installed on an exercise

machine or similar, we recommend that

a standard data connection point (RJ45

socket) is installed adjacent to the RH-8
location, and that this is wired back to the
CAM-16/CAS-16 using CAT-5 installation

cable. The 3 m cable supplied with the RH-8
can then be used to patch between this
socket and the RH-8.

Ensure that the data point is installed in a

safe location. A flush-mounting floor socket
with a hinged lid or a recessed floorbox
is the ideal solution, as this minimises

the likelihood of damage to the cable or
connector.

If the RH-8 is to be mounted on a flat
surface, there will probably be no necessity

for the intermediate data point, and the installed CAT-5 cable can be run
directly to the RH-8’s location.