Cloud Electronics RH-8c - Manual (Page 12)

RH-8 Installation Guide 12
installation instructions below (see “Mounting the RH-8 on a flat surface” on
page 14). Otherwise, secure the top cover with the original screws.
Mechanical
Two methods of mounting the RH-8 are available: to the tubular framework of
a structure such as an exercise machine, or to a flat surface.
Mounting the RH-8 on a tubular frame
On the base of the RH-8 note the four recesses
5
and
6
in the plastic
moulding. The two on the “long” axis of the base are used if the RH-8 is to be
mounted on a vertical tube; the two on the “short” axis are used to mount it
on a horizontal tube.
Decide the mounting position; it should be readily accessible to the user, but
not in his or her way. If connection is to be via the RJ45 socket on the base,
ensure that its access is not fouled by the frame. Locate the two nylon cable tie
brackets (supplied) in the appropriate pair of recesses, and press the snap rivet
through the hole until it locates.