Cloud Electronics Z4MK3 - Manual (Page 6)

Z4-8 MK3 Installation and User Guide 6
Optional System Components
The following components may form part of the audio system
and may be ordered separately if required. They may also be
retrofitted to a system at a later time. Separate datasheets
are available for each of the individual components; download
them at
www.cloud.co.uk .
LM-2 Mic/line input module with remote
music control
MIC LEVEL
1
2
3 4
5
6
MUSIC LEVEL
LINE INPUT MIC INPUT
LM-2
MIC
PRIORITY
1
4
5
2
3
6 7
9
10
8
0
1
4
5
2
3
6
7
9
10
8
0
1
4
5
2
3
6 7
9
10
8
0
The LM-2 is an active input module which allows a microphone
and a stereo line input to be connected to the Zone Mixer
in a remote location. The faceplate has both phonos and a
3.5 mm jack socket for connection of the line input, and
provides a convenient access point for the connection of a DJ
mixer, laptop, MP3 player or similar. Mic and line inputs have
separate level controls.
A MIC PRIORITY button activates the
Zone Mixer’s priority circuitry; when enabled, a microphone
signal from the LM
-2 will reduce the music level in the zone
where it is installed. Changing a rear jumper alters the priority
operation so that the mixed mic and line signals from the
module cause the mixer’s line input selected to the Zone to
be fully muted.
The module also includes the functions of the RSL-6 Remote
Control Plate, permitting control of zone music level and
source.
The LM-2 connects to one of the unit’s Facility Ports via
screened Cat 5 cable, and the remote inputs are fed to that
zone only. The mixer’s Mic inputs remain available. Multiple
LM-2s (in the same zone) may be daisy-chained to provide mic
inputs in more than one position. The LM-2 is available in sizes
to suit UK, US and German electrical back boxes; a choice
of finishes is also available. See “Connecting an LM-2 remote
input module” on page 12 and “LM-2 active input modules
– general considerations” on page 18 (LM-2 active input
modules – general considerations) for more information.
RL-1 Series Remote Music Level Control
4
5
6
1
2
3 7
9
10 0
8
MUSIC LEVEL
RL-1
The RL-1 Series is a range of small plates with a single control
for locally adjusting the music level in a zone. They connect
to one of the mixer’s REMOTE SOURCE + LEVEL ports. See
“Connecting an RL-1 Series remote control plate” on page
14 and “RL-1 Series and RSL-6 Series remote control plates
– general considerations” on page 19 for more information.
RSL-6 Series Remote Music Level/source
Control
RSL 6 -
1
2
3
4
5
6
MUSIC LEVEL
SOURCE SELECT
4
5
6
1
2
3 7
9
10 0
8
The RSL-6 Series is a range of plates of the same size as
the RL-1s; they connect in a similar way. They allow local
music source selection as well as music level control. See
“Connecting an RSL-6 Series remote control plate” on page
14 and “RL-1 Series and RSL-6 Series remote control plates
– general considerations” on page 19 for more information.