Vertical SBX IP 320 - Manual (Page 85)

Using the Basics 3 - 3
Chapter 3: Using the 8-Button Digital Phone
SBX IP 320 Phone User Guide
Phone Buttons and Features
Feature Used to...
1 Headphone Jack speak to a caller when using a headset instead of
holding the handset.
2 Handset answer or place an internal or external call.
3 LCD Display display phone status information, dialing directories,
and test message information.
4 Speaker hear the other party during a call without using the
handset or headset (hands-free mode).
5 MSG LED indicate new voice mail messages are waiting.
6 Pre-Programmed/
Flexible Buttons (8)
access external line calls, pre-assigned features, or
user defined feature code assignments.
Note: These include Flex Button 1: DND and Flex
Button 2: CALL BACK.
7 TRANS/PGM Button set up a conference call or transfer a call. It is also
used to access User Programming features.
8 SPEED Button access speed dialing, saved number redial, and last
number redial. Button is also used to access flexible
button programming.
9 Microphone (MIC) used to speak to a caller when in speaker mode.
10 VOLUME Button decrease (-) or increase (+) the volume of the speaker
or handset while on a call. This button is also used to
scroll up and down in the User Programming menus.
11 HOLD/SAVE Button put a call on hold or save the current User
Programming setting.
12 SPEAKER Button toggle between speaker (or headset) mode and hand-
set mode. You can also use this button to exit any
menu screen.
Note: The button is red when speakerphone
is active.
13 Dialpad dial phone numbers and make entries on the display.