Denon DN-C640 - Manual (Page 17)

9
ENGLISH
2. PREPARATIONS
INSTALLATION
■ Mounting in a rack
• The DN-C640 is of 1U size, allowing it to be mounted in EIA
standard 19-inch racks.
When mounting the DN-C640 in a rack, use guide rails or
shelf boards, etc., on the rack side to prevent weight from
being applied to the front of the DN-C640. The fittings alone
cannot support the weight of the DN-C640 (4.3 kg).
Do not cover the top of the unit. Remember, heat is
dispersed from the DN-C640’s upper surface.
• Set up the installation environment carefully. For example,
take care to protect the DN-C640 from heat from other
devices. If necessary, use forced ventilation. The surrounding
conditions must meet the specifications described in
“SPECIFICATIONS” on Page 44.
• The DN-C640 will work normally when the player unit is
mounted with the front panel within 10 degrees of the
vertical plane. If the unit is tilted excessively, discs may not
load or unload properly.
DN-C640
Max. 10°
• If the DN-C640 is placed near an amplifier, tuner or other
components, noise (induced hum) or beat interference may
result (especially during AM or FM reception).
If this occurs, separate the DN-C640 from other components
or reorient its position.