Caple C2471 - Manual (Page 19)

19
If necessary, remove the door’s inner
glass assembly. This assembly is
composed of one or two sheets of
glass (depending on model), each of which
has a black rubber corner pad.
After cleaning, reposition the four
rubber pads, taking care to follow the
indications on the glass:
* top left: L
* top right: R
Place your inner glass assembly in
the door so that L and R are located
on the hinge side.
- If your oven is equipped with a single
inner sheet of glass, it must be located as
close as possible to the clipped glass.
Clip in your last glass sheet by
placing the indication “PYROLYSIS”
so that it faces you.
Remove the red plastic stops.
Your appliance is again operational.
8
7
6
5
4
The Cleaning function
CLAC
CLAC
L
R