Caple C3400 User Manual
Page 26
26
To remove the telescopic sliding shelf supports:
– Remove the side racks by unscrewing the fixing screws (Fig. 6.4).
– Lay down the telescopic sliding shelf support and side racks, with the telescopic slid-
ing shelf support underneath.
– Find the safety locks. These are the tabs that clip over the wire of the side rack
(arrow 1 in Fig. 6.5).
– Pull the safety locks away from the wire to release the wire (arrow 2 in Fig. 6.5).
Cleaning the sliding shelf supports
– Wipe the supports with a damp cloth and a mild detergent only.
– Do not wash them in the dishwasher, immerse them in soapy water, or use oven
cleaner on them.
1
2
1
Fig. 6.5
Fig. 6.4