Caple C2500SS - Manual (Page 9)

9
ELECTRICAL CONNECTIONS
Before connecting the oven to the mains power supply, make sure that:
- The supply voltage corresponds to the specifications on the data plate on the front of the
oven.
- The mains supply has an efficient earth (ground) connection complying with all applicable
laws and regulations. Correct earthing (grounding) is a legal requirement. If the appliance
is not pre-fitted with a power cable and/or plug, use only suitable cables and plugs
capable of handling the power specified on the appliance’s data plate and capable of
resisting heat. The power cable should never reach a temperature 50° C above ambient
temperature at any point along its length. If the appliance is to be connected directly to
mains terminals, fit a switch with minimum aperture of 3 mm between the contacts. make
sure that the switch is of sufficient capacity for the power specified on the appliance’s
data plate, and compliant with applicable regulations. The switch must not break the
yellow-green earth wire. The socket or switch must be easily reachable with the oven
fully installed.
* CABLE TYPES AND DIAMETERS 230V H05RRF 3 x 1 mm 2
Fig. 9
N.B. The manufacturer declines all responsibility for damage or injury if the above
instructions and normal safety precautions are not respected.