Caple C195 53 - Manual (Page 10)

REVERSING THE DOORS
• Remove the caps of pin R from the top and bottom left hinge.
• Remove the caps of the top and bottom door heads and replace them with the sleeves
supplied.
• Close the appliance door, loosen side screws S used to lock pins T Then slide the lock
pins into their hinges. Then remember to fasten them.
• Move the plastic-adjusting washers, making sure you do not reverse the numbers
between the top and bottom hinges.
• Loosen the side screws used to support the left hinge pins. Then slide the hinge pins
into the previously fitted door head sleeves and remember to insert the adjusting
washers and fit the pins.
NB: The material supplied is contained in the bag placed in the vegetable drawers.
REVERSIBLE FREEZER COMPARTMENT DOOR (IF SUPPLIED)
• Detach doorstopper Y, hinge bracket X and remove the door.
• Remove the 4 hole caps (2 on the right and 2 on the left)
• Fit doorstopper Y on the right side of the appliance.
• Turn over and insert the door with its handle on the right.
• Turn over and mount hinge bracket X on the left.
• Seal the remaining holes using the 4 caps that you removed.