Caple ST520 - Manual (Page 6)

6
INSTALLATION
SM903
To avoid any damages remove the grease
filter before proceeding with the installation
pulling the handle and making the filter turn
dawnwards before removing it.
Take time to consider at least 60mm of
material round the hole in order to avoid
any damage during the following product in-
stallation phase.
Adjust the position of the lateral springs
to fit the thickness of the material you are
using to fix the unit (Fig. 1).
Connect the appliance to the electric
mains.
Insert the unit from below, making sure that the
springs, previously adjusted (Fig. 1), are strong
enough to keep the product fixed (fig. 2);
Insert the four blocking levers and fix them
using the screws, as showed in fig. 3 and fig. 4;
Mount the grease filter.