Warnings, Uses, Installation – Caple VE550BK User Manual
Page 5
5
In order to avoid possible fire risk, all in-
structions for grase-filter cleaning and for
removing eventual grease deposits should
be strictly followed.
WARNINGS
* The appliance is not intended for use by
young children or infirm persons without
supervision. Young children should be su-
pervised to ensure they do not play with
the appliance.
* The cooker surface and the inferior part
of the cooker hood must be at a minimun
distance of 65 cm.
If the rating lable in the cooker-hood
shows the symbol , the appliance is
built in class II° and it does not need any
earth connection.
If the rating lable in the cooker-hood does
not show the symbol , the appliance is
built in class I° and it needs the earth con-
nection.
* When performing the electrical connections
on the appliance, please make sure that the
current-tap is provided with earth connection
and that voltage values correspond to those
indicated on the label placed inside the ap-
pliance itself.
* Before carrying out any cleaning or main-
taining operations, the appliance needs to
be removed from the electric grid. If the ap-
pliance is not provided with a non-separable
flexible cable and plug, or with another de-
vice ensuring omnipolar disconnections from
the grid, with an opening distance between
the contacts of at least 3 mm, then such di-
sconnecting devices must be supplied within
the fixed installation.
If the fixed appliance is endowed with a sup-
ply cord and a plug, the appliance has to be
put in a place where the plug can be reached
easily.
* The use of materials which can burst into
flames should be avoided in close proxi-
mity of the appliance. When frying, please
pay particular attention to fire risk due to
oil grease. Being highly inflammable, fried
oil is especially dangerous. Do not use un-
covered electric grills.
USES
The appliance can only be used in the filte-
ring version, so it is equipped with metal gre-
ase filters and activated charcoal filters.
INSTALLATION
Make sure that the packaging is in perfect
conditions and that none of the components
inside is damaged : in case of damaged com-
ponents, please contact your retailer and do
not carry out installation.
Read all of the following instructions before
carrying out installation.
VIE550BK Installation
Place the fixing plate (Fig.1) into the cei-
ling, in a position which coincides with the
centre of your cook-top, then drill the ho-
les and fix the plate by using the screws
and screw anchors supplied with the ap-
pliance. The power cord needs to pass
through the plate hole, which is shown by
the arrow in Fig.1.
Remove the appliance from its packaging
and place it in a suitable area, where it is
not likely to be damaged.
Fix the articulated rod to the product by
inserting and tightening the fixing screw,
as shown in Fig. 2.
Adjust the height of the appliance , ma-
king sure a minimum distance of at least
65 cm is maintained between the lowest
part of the hood and the cook-top; height
adjustment can be done by loosening the
rod fixing screws , adjusting the appliance
height and then by fastening them again.