Caple 1MINCH6 User Manual
Page 2
▇
▇
▇
▇
TABLE OF CONTENTS
Contents
1. Extraction Without Intrusion
P1~3
2. Safety & Cleaning
P4~5
3. Alternative Methods Of Extraction
P6
4. Operation
P7
5. Fitting Charcoal Filter / Bulb Replacement
P8
6. Electrical Connections
P9
7. Not Working Properly
P12
8. Technical Data
P13
The extractor is designed to give you the option to extract air by the
outside and away (via exterior wall), or to re-circulate air through
designed filters to minimize odors, steam and condensation. For internal
recycling the following is required .CF11 Charcoal Filter .Contact 01
4505327 To order
The choice is yours to decide at installation, and both systems are
explained in this booklet.
We recommend that you read this booklet from cover to cover before
attempting to install or operate the extractor
Installation
THESE INSTRUCTION MUST BE STRICTLY ADHERED TO, FAILURE
TO COMPLY COULD RESULT IN OVERHEATING AND SERIOUS
DAMAGE TO YOUR APPLIANCE
To secure the product to the wall you must initially remove the
grille/anti-grease filters. This is achieved by opening the front panel and
pushing the two catches (A) upwards which will then release the grille.
P1
Extraction Without Intrusion