Caple ZC620 - Manual (Page 13)

Trouble Shooting Guide
Problem Possible Reason Solution
Hood doesn't turn on.
No electrical supply.
Check the plug is connect ed.
Check the main switch is turned
on.
Power cord is damaged Contact your service technician
Poor Airflow
Aluminum grease filters clogged
Clean the filters and replace
when dry.
Charcoal filters clogged.
Re-circulating mode only.
Replace the charcoal filters.
Hood is vibrating Hood is not secured in place
Check the installation of hood.
Tighten mounting screws.
Motor running but no
air flow
Butterfly valve jammed. Contact your service technician
Motor stops after a few
minutes
High temperature safety device
activated.
The kitchen is not sufficient ly
ventilated.
The hood is installed too near the
cooking surface. The hood must be at least
61cm (24”) from the stove
Strong cooking smell.
Fan speed too low Use one of the higher set tings.
Charcoal filters not installed.
In re-circulating mode, char coal
filters must be installed.
Oil dripping onto stove. Aluminum grease filter satu rated.
Wash the aluminum grease
filters
Whirring sound
Something in contact with fan blade.
Contact your service technician
Lights are working but
fan isn't
Contact your service technician
Fan is working but lights
are not
Contact your service technician
GUARANTEE AND SERVICE!
Before booking a service call,read the Trouble Shooting Guide above , for more information on
guarantee and service conditions, please contact local dealer.