Caple SP610BK - Manual (Page 4)

Planning Your Installation
INSTALLATION INSTRUCTIONS
Before You Start...
1. Read this manual carefully and completely.
2. The cooker hoods conform to related appliances standards. Please check your local building codes for
any additional requirements.
3. The appliance has been manufactured as class I, therefore earthed connection is necessary. The range
hood must be installed so that the plug is easily accessible.
1. Measure the floor to ceiling height. This hood
can be installed on walls between 8” and 9” tall.
2. Find the centre point of your opening. Mark a
plumb line through this point from ceiling to
your range/cook-top.
3. Check your range/cook-top User Manual for
the minimum distance above your cooking
surface. The minimum distance between any
element or flame height and the nearest
combustible surface is 61cm (24”).
4. Decided where the ductwork will run between
the hood and the outside. Short, straight duct
runs will provide the most air flow.
5. If a kit is necessary, you may
purchase one through your dealer.
recirculating
Unpacking
Remove the packaging with the product in place. Cut off the packing ribbons and carefully cut open the
packaging (do not cut too deeply), remove the packaging. Check that the product is free from transport
damage. Any damage shall be reported immediately to the carrier or
. Damage, faults and missing
parts must be reported immediately to the
retailer
retailer
Earthed
Outlet Box
Earthed
Outlet
Earthed Plug