Caple SP610BK - Manual (Page 12)

Trouble Shooting Guide
Problem Possible Reason Solution
Hood doesn't turn on.
No electrical supply.
Check the plug is connected.
C h e c k t h e m a i n s w i t c h i s
turned on.
Power cord is damaged Contact technician service
Poor Airflow
Aluminum grease filters clogged
Clean the filters and replace
when dry.
Charcoal filters clogged.
Re-circulating mode only.
Replace the charcoal filters.
Hood is vibrating Hood is not secured in place
Check the installation of hood.
Tighten mounting screws.
Motor running but no
air flow
Butterfly valve jammed. Contact technician service
Motor stops after a few
minutes
High temperature safety device
activated. The kitchen is not sufficiently
ventilated.
The hood is installed too near the
cooking surface. The hood must be at least
61cm (24”) from the stove
Strong cooking smell.
Fan speed too low Use one of the higher settings.
Charcoal filters not installed.
In re-circulating mode, charcoal
filters must be installed.
Oil dripping onto stove. Aluminum grease filter saturated.
Wash the aluminum grease
filters
Whirring sound Something in contact with fan blade.
Contact technician service
Lights are working but
fan isn't
Contact technician service
Fan is working but lights
are not
Contact technician service
GUARANTEE AND SERVICE!
Before booking a service call,read the Trouble Shooting Guide above , for more information on guarantee and
service conditions, please contact local dealer.