Caple CGi910 - Manual (Page 5)

5
External Cleaning
ƒ The metal casing, grill and chimney should be cleaned at least once a month to keep it looking like new. Wipe over
the hood with a soft cloth wrung out in mild soapy water and then dry thoroughly.
ƒ Never use scouring pads or abrasive cleaners as they may scratch or damage the surfaces.
ƒ Always wear protective gloves when cleaning the hood.
ƒ Never use excessive amounts of water when cleaning particularly around the control panel.
Metal Grease Filter
ƒ The metal grease filter should be cleaned at least every month. The filter may be washed by hand using mild soapy
water, or can be machine washed in a dishwasher.
ƒ Remove the metal grease filter cassette by pushing inwardly on the two steel handles; replace, making sure the
handle has sprung back into position and is completely visible.
Charcoal Filter (for re-circulation use only)
ƒ This is not supplied with the extractor and should be purchased from your supplier as an accessory.
ƒ The charcoal filter cannot be cleaned; it should be replaced approximately every three months or more often if the
hood is used for more than three hours per day.
ƒ To remove the charcoal filter push inwardly on the two retaining clips to disengage the security fixing and remove.
ƒ This appliance can be a fire hazard if the grease and charcoal filters are not cleaned and replaced as recommended.
LIGHTING
Halogen lighting
ƒ The lamps should be replaced with 12V 20W halogen spot lamp.
ƒ To Remove the Lamps: -
o
Unscrew the two screws to release the metal surround.
o
Remove a lamp from the holder by pulling the lamp downwards.
ƒ When fitting the new lamp ensure the two pins are correctly inserted into the slots in the lamp holder.
ƒ Handing the lamp with un-covered fingers will reduce the lamp life considerably..