Campomatic TL10E - Manual (Page 9)

Preparation before washing
7
Before washing, please do take out coins,
keys and other hard goods, and zip up clothes
and barrel from damage.
！
NOTICE
Adjust the adjustable foot to make
the washer be placed stable. 1
Adjustable foot (extend when
clockwise rotating and shorten
when counterclockwise rotating)
(Slightly incline the washer first and loosen the
adjustable foot knob. Adjust the adjustable foot so
as to ensure four corners of washer be steadily
contacted with the ground. Then tighten the
adjustable foot knob and lock it. If the ground is
obviously not flat, correction should be made on
the ground surface, otherwise the washer barrel
will incline and knock the cabinet)
Connect with to
power source. 3
4
+ +
Put down the drain
house. 5
Gravity drain
Upper drain
Note:
The water
will overflow
when the
height of
the drain
hose under
860mm. > 860mm
Put in
clothes
and
suitable
amount of
washing
powder. 6
Install the water
inlet hose. 2
+ +
For one inlet hose
For two inlet hoses
+ + + +
8
Parts identification of the washer
tightly to prevent them
Turn on the
water supply.
Top lid
Control panel
frame
Cabinet
Drain hose
(For lower drain only)
Adjustable leg
Adjustable foot knob
Upper drain hose
(For upper drain only)
Accessories
Water inlet hose assembly Base cover
Only for lower drain hose
Fixing ring (1) is used
for the fixing in time of
the installation of the
lower drain hose.
Universal connector
Water inlet hose assembly
Self-tapping screw
Only for models including base cover Only for model with double
screw thread water inlet pipe Only for model with single
screw thread water inlet pipe
Please refer to the real material as the attachment