Campomatic TL10E User Manual
Page 17
15
16
About the procedure of full automatic wash program
Cleaning and Maintenance of the washing machine
If the drain filter is not cleaned at proper time (every 10 times of use),Drain problem could be caused.
Notes:
End of program
The washing machine will send off the sound
of dou-dou at the end of any program operation
to remind you to take out the laundry or operate
it again.
After the sound ,the washing machine returns
to its power-off state with no display and all lights off.
Please shut off the tap, pull out the plug when not
in use to avoid water leakage or the fire accidents.
"
"
Maintenance
Use gentle clothing to wipe off the water and dirt on
the surface each time after using the washing machine.
Detergent , propellant and
other chemicals are not
allowed to use so as to avoid
any damage to the plastic
accessories.
Clean the water inlet
Clean the lint filter in the drain pump (only for having drain filter)
1. Drain the water out of the
pump,under which use a
container to collect.
2. Loosen the pump cover
anticlockwise.
3. Take out the lint filter.
4. Clean the filter.
5. Restore it and adjust the
convex place to align at
the pump hole.
6. Tighten the pump cover
clockwise.
Clean Of the filter
After
long
time
use,
the
water
inlet
mesh
bag
may
be
blocked
with
smudginess,
and
should
be
cleaned
according
to
the
following
steps:
1.
Switch
on
the
power,
followed
by
shutting
off
the
tap .
2.
Let
the
washer
works
for
5
seconds
so
that
water
flows
into
the
tub
through
the
water
inlet
hose.
then
turn
off
the
power.
3.
Unload
the
water
inlet
hose
and
clean
the
mesh
bag,
then
restore
the
water
inlet
assembly.
After
using
the
washing
machine
for
a
period,
please
clean
it
according
to
the
following
steps:
1.
Take
out
the
lint
filter.
2.
Open the filter
and
wash
it
clean
in
the water.
3.
Restore
it
and
fix
it.
After using the washing machine for a period, clean it
according to the following steps:
1. Take off the lint filter.
2. Turn over the mesh bag and wash it clean in the water.
3. Restore and fix it.
(only for magic filter)
(only for normal filter)