Campomatic RS600 - Manual (Page 7)

Empty the recovery tank
Unplug extractor from electrical outlet.
C
B
A 6 An automatic shut-off device prevents the extractor
from picking up more dirty water than it can hold
in the recovery tank.
You will know the tank needs to be emptied
When the motor sound rises in pitch.
You do not see dirty solution coming up through
the recovery tank lid.
The float (A) inside the recovery tank has risen
to the top of the tank (Fig.6), and is visible
through the transparent tank (B).
D
7
Unlock button (C) in the nozzle. (Fig.6)
Step on handle release pedal (D) to lower handle and
(Fig.7)
Unlock the recovery tank. Using recovery tank hook (E),
lift up on tank lid (F) and pull off (Fig8)
Press the button clip (G), and remove the tank lid. Empty
tank. (Fig.9)
Replace lid, revolve the tank handle until the tank lid
is locked and place tank to the cleaner.
F
E
8
Lock the button (C) (Fig.6) between nozzle and nozzle
cover.
Return handle to upright position.
Caution: Make sure hook the nozzle cover before you
lift up on tank lid!
×
G 9
6