Campomatic RS600 - Manual (Page 6)

Fill the solution tank
Pull up on solution tank handle (A), then remove solution tank (Fig.4).
Turn tack perpendicularity plumb and anti-clockwise the lid (B) (Fig.5).
Pour one lid of detergent into the tank.
Fill the tank completely with hot tap water (below 60 degree) until the limited line.
Replace the lid (B).
Place tank back into extractor, pressing firmly to be sure tank is fully positioned.
B
5
Caution: Detergents contain Anionic and Nonionic
Surfactants. Avoid contact with the eye and skin.
A B
A
4
5