Campomatic KOCVBI User Manual
Page 4
3
1.TECHNICAL SPECIFICATION
MODEL KOC45VBI
CAPACITY（L）
35
VOLTAGE
（V）/FREQUENCY（Hz）
220-240/50
DISTRIBUTION LINE FUSE（A）/CIRCUIT
BREAKER（A）
16
MICROWAVE INPUT WAVE（W）
1500-1600
MICROWAVE OUTPUT POWER（W）
1000
MICROWAVE WORKING FREQUENCY（MHz）
2450
GRILLING POWER（W）
1400-1650
CONVECTION POWER（W）
1350-1500
PRODUCT DIMENSION（mm）
594×530×455
PACKAGE SIZE（mm）
675×666×525
DIAMETER OF ROTATING PLATE（mm）
315
GROSS/NET WEIGHT（Kg）
38.0/34.3
2.PRECAUTIONS FOR USE
This manual is an integral part of the appliance. Take good care of it and keep it to hand throughout the oven’s
life cycle. We urge you to read this manual and all the information carefully before using the appliance. Installation
should be carried out by qualified technician in compliance with the relevant regulations. This appliance is for
household use and complies with the EEC directives currently in force. The appliance is for cooking and heating food.
The manufacturer declines all liability for other uses except for cooking food.
Keep the documentation of this product for future reference. Always keep the instruction manual handy.
Never use this appliance for heating rooms.
Never leave packaging residues unattended in home. Separate the various packaging materials on type and
consign them to the nearest separate disposal centre.
This manual contains the regulations of recycling decommissioned appliances.
Never obstruct vents provided for ventilation and heat dispersal.
Never use metal scouring pads or sharp scrapers which will damage the surface. Use ordinary non- abrasive
products with the aid of wooden or plastic utensils if necessary. Rinse thoroughly and dry with a soft cloth or chamois
leather.
The nameplate with the technical data, serial number and mark is in a visible position on the oven door frame.
The nameplate should never be removed.
The appliance should be connected to earth in compliance with electrical system safety regulations.
If a permanent connection is used, the appliance’s power supply wire should be fitted with a polar breaking
device with contact gap of at least 3 mm, located in an easily accessible position close to the appliance itself.