Campomatic DVD5030B - Manual (Page 22)

20
Setup – customizing setting in the main menu
Specific setting method and description
!
Menu Submenu Item Setting and description
Audio
Audio
output
HDMI
(select the digital audio
signal format from HDMI
terminal)
Down-sampling
frequency
(select the down-sampling
frequency of digital audio
signal PCM code)
Dynamic output
compression
(set the dynamic
compression to ON/OFF
Turn off the signal output of digital audio output
terminal of the player.
Bit stream
PCM
Re-encode
OFF
Same as above
48K
If the input audio is higher than 48KHZ, the
original audio will be down-sampled to 48KHZ or
lower. If the audio device supports audio input
higher than 48KHZ, this option isn’t
recommended.
96K
If the input audio is higher than 96KHZ, the
original audio will be down-sampled to 96KHZ or
lower. If the audio device supports audio input
higher than 96KHZ, this option isn’t
recommended.
192K
If the input audio is higher than 192KHZ, the
original audio will be down-sampled to 192KHZ
or lower. If the audio device supports audio input
higher than 192KHZ, this option isn’t
recommended.
ON (enable dynamic output compression
OFF (disable dynamic output compression)
Auto
Digital output
(select the digital audio
signal format from the
digital audio output
terminal)
!
Bit stream
PCM
Re-encode
OFF
Bit stream:
When “Bit stream” is selected, the digital audio
signal will output in the format of original stream.
Select when connected device can decode.
PCM:
Select “PCM” when the connected device can’t
decode. When this option is selected, output
pulse code modulation (PCM) digital signal.
Re-encode:
Output re-encoded digital signal.
OFF: