Campomatic C960 - Manual (Page 9)

CHANGING THE OVEN BURNER INJECTOR
• Ensure that the oven is electrically disconnected;
• fully open the oven door;
• take the bedplate out
• slide the burner out as follows:
1. take the diffuser element C out, removing the nuts D;
2. move the plug holder bracket E plus thermocouple;
3. remove the screw B and slide out the burner tube;
4. remove the injector F with a 7 mm spanner and replace it
(the injector must be locked to prevent it sliding out).
• refit the oven burner performing the above oprations in reverse order;
• replace the bedplate.
Pay particular attention to the plug wires and thermocouple tubes.
CHANGING THE GRILL BURNER INJECTOR
• Ensure that the oven is electrically disconnected;
• fully open the oven door;
• slide out the grill burner at the top of the oven as follows:
1. release the ignition plug and the thermocouple bulb from the grill
burner;
2. remove the grill burner fastening screw and slide it to the right;
3. remove the injector D with a 7 mm spanner and replace it following
the instructions in table 2 (the injector must be locked to prevent it
sliding out);
4. refit the burner following the above operations in reverse order.
Pay particular attention to the plug wires and thermocouple tubes.