Campomatic C960 User Manual
Page 6
ELECTRICAL CONNECTION
Before connecting the appliance to the mains, ensure that:
The voltage corresponds to the voltage specified on the rating plate on the oven.
The overload cut-off device and the domestic system can withstand the load of the
appliance (see rating plate).
The power supply system is provided with an efficient earth connection and that the
socket or omnipolar switch, with minimum contact opening of 3mm, is easily accessible
once the appliance has been installed.
If the plug is not easily accessible, the installation personnel must provide an omnipolar
switch with contact opening distance equal to or greater than 3 mm.
The power supply cable must be positioned so that it does not at any point exceed the
ambient temperature by 50°C.
Warning: Connect the wires in accordance with the following colours/codes:
yellow - green = earth
blue
= neutral
brown
= phase