Campomatic AC12MP - Manual (Page 12)

INSTALLATION INSTRUCTIONS
10
Installation in a double-hung sash
windows
1. Cut the foam seal(adhesive type) to the proper length and
attach it to the window stool. Fig.10
2. Attach the window slider kit to the window stool. Adjust the
length of the window slider kit according to the width of
window, short the adjustable window kit if the width of
window is less than 27 inches.
Open the window sash and place the window slider kit on
the window stool. Fig.11
3. Cut the foam seal(adhesive type) to the proper length
and attach it on the top of the window. Show as in Fig.12
4. Close the window sash securely against the window.
5. Cut the foam seal to an appropriate length and sealing the
open gap between the top window sash and outer window
sash. Show as in Fig.13.
Foam seal A
(adhesive type)
Foam seal
Fig.10
Fig.11
Fig.12
Fig.13
Window kit
Window stool
26.5 ~ 48
Window kit
Window stool