Burst Electronics F2B - Manual (Page 6)

bar. The range is from about 0.15 seconds to 5
seconds. Select the speed you desire by adjusting
the position of the fader bar. Upon hitting the
TAKE
pushbutton (or activating a GPI), the action (be it A
to B, B to A, or A to Black) will occur at your preset
speed.
Options Available: PAL, Y/C (S-VHS, Hi8)
Model VM-2 Video Mixer
As with the VMF-2, this unit requires both inputs (A
& B) be
synchronous
(genlocked). This
unit fades between
channel A and
channel B. The fade
speed ranges from
0.15 seconds to 5
seconds. The adjustment for this timing is set by the
Control knob on the front panel. Turn the knob
clockwise for a faster fade rate, counter-clockwise
for a slower fade rate. The
TAKE switch controls the
fade from either channel A to B, or from channel B
to A. Flip the
TAKE switch towards the channel you
wish to fade to. The LED will indicate which channel
is currently being displayed.
The 3.5mm rear panel connector is for remote
control. To select channel A, connect
RING to TIP;
channel B is
RING to SLEEVE.
Options Available: PAL, Y/C (S-VHS, Hi8)
Video Mixers & Faders 4