Directed Electronics 750 - Manual (Page 9)

6
Button, then Button
Accessory C output is controlled by these buttons.
Button twice, then Button
These buttons active remote Valet ® .
Button twice, then Button
These buttons disable the sensors.
Button twice, then Button
These buttons enter safe start mode for manual transmission vehicles
and activate Autostart mode.
Button three times, then Button
These buttons adjust the dual-zone omnisensor.
Button three times, then Button
These buttons adjust the dual-zone radar sensor.
using your system
The buttons used in the instructions in this manual correspond to the
standard remote configuration. If your remote has been custom con-
figured, the icons on your remote buttons may not correspond to the
indicated functions.