Directed Electronics 750 - Manual (Page 31)

28
user selectable features descriptions - column three
The features in this column pertain to programming individual remote chan-
nels in custom configurations. Following is an explanation of the features.
arm/disarm only
The remote control channel programmed into this feature will arm/dis-
arm the system only.
accessory a output
The remote channel programmed into this feature will activate the
accessory output.
accessory b output
The remote channel programmed into this feature will activate the
accessory output.
silent mode
The remote channel programmed into this feature will arm/disarm the
system, but the siren will not chirp.
remote valet ®
The remote channel programmed into this feature will make the system
enter/exit valet mode.
nnoottee:: When programming a new remote control to custom configura-
tion a channel must first be programmed to this feature before pro-
gramming the remaining channels.