BUG-O Systems CAS-2060 - Manual (Page 6)

6
SETUP
CaS-2060 automatic Height Control
This is available as original equipment or as a retrofit unit designed to provide Automatic Height Control
on BUG-O Modular Drive Systems (MDS) with the Pendulum Weaver (WPD-2100).
CaS-1500 Height Slide assembly
This replaces the Gun Mounting Group originally supplied on the Pendulum Weaver. To install, begin
by remove the WPD-2050 Gun Mounting Group from the weaver, [Refer to Modular Drive System
Instructions and Parts Manual]. Install Pendulum Weaver Adapter CAS-1558 for CAS-1500. Slide clamp
on bottom of Height Slide Assembly CAS-1500 onto the CAS-1558 and lock in position.
CaS-2055 MdS aHC Control Box
This mounts directly on top of the MDS Drive. Align the socket on the top of the MDS Drive with the
plug on the bottom of the AHC Control Box and seat it firmly and secure in place with the four (4)
screws, one (1) in each corner.
CaS-2051-10 MdS aHC 10' (3.0 m) Remote Control
To install, align the plug in the bottom of the male portion of this Remote Control with the socket on
top of the CAS-2055. Seat this plug firmly and secure in place with the four (4) screws, one (1) in each
corner.
CaS-1558 Pendulum Weaver adaptor