BUG-O Systems BUG-6550 - Manual (Page 5)

5
INTRODUCTION
The Universal Bug-O-Matic with Automated Height Control (AHC) improves weld quality through automation
in three planes of movement. The powerful drive motor maintains a constant travel speed during welding; the
built-in precision oscillator provides a uniform weave pattern; and the height controller maintains a constant
tip to work piece distance. This versatile machine is compatible with a variety of BUG-O carriages and rails
to suit your welding needs.
TECHNICAL DATA
Power Requirements BUG-6550 120VAC/50-60/1
BUG-6552 240VAC/50-60/1
BUG-6554 42VAC/50-60/1
Linear Speed 3-70 ipm (75-1750 mm/m)
Weave Speed 4-100 ipm (100-2500 mm/m)
Dwell Times 0-3 seconds left
0-3 seconds right
Weave Width 0.1-2.0" (2.5-50 mm)
Steering 2" (50 mm) left & right of center
4" (100 mm) total
Load Capacity 30 lbs. (14 kg)
Net Weight 22 lbs. (10 kg)
FEATURES
• Automated Height Control (AHC) maintains constant weld tip to work piece distance.
• Remote control allows operator to start/stop weld and steer welding tip from up to 10 ft. away.
• Lockable digital dials for key parameters prevent accidental adjustment and display numeric value
for setting, allowing repeatable setup of parameters.
• Proven rack and pinion drive provides accurate travel speed.
• Independent left and right dwell controls.