BUG-O Systems BUG-6550 - Manual (Page 29)

29
CARRIAGE WHEEL ADJUSTMENT
The MDS-1055, MDS-1065 and BUG-5960 carriages feature wheels that ride
in grooves along the side of the rail. For each of these carriages, the adjustable
wheels have stainless steel shim washers (A) underneath. Readjust these
wheels (if necessary) by rotating the hex bolt (B) with a 1/2" wrench.
Grasp the sides of the carriage. The wheels are too loose if it is possible to
move the carriage from side to side or up and down. Use a finger to keep one
of the adjustable wheels from rotating as the carriage is manually pushed along
the track. The wheels are adjusted too tight if firm finger pressure is not enough
to prevent wheel rotation. Repeat the process for the other adjustable wheel.
FMD-1105 HI-FLEX CARRIAGE / EXPLODED VIEW / PARTS LIST
The Hi-Flex Carriage can be placed anywhere along the track using the quick release knob on the
side of the carriage to engage/disengage the wheels from the track. Use with BUG-O Hi-Flex Rails.
ITEM QTY PART NO. DESCRIPTION
1 4 BUG-2841 Washer 5/8" O.D. X 5/16" I.D. Teflon
2 2 FAS-0659 Soc Hd Shr 5/16-18 X 1"
3 2 FMD-1093 Standoff .875 Dia. .688 Lg.
4 1 MPD-1035 Handle W / Cable Anchor
5 4 FAS-0956 Screw, Flat Hd Cap 5/16-24 x 5/8
6 1 FMD-1022 Carriage For Flex Rail
*A 1 FMD-1068 Fixed Wheel Mounting Block
*B 1 FMD-1069 Adj. Wheel Mounting Block
*C 1 FMD-1081 Bearing Block
*D 8 FAS-0386 Screw, Hex Hd Cap 5/16-24 x 5/8
*E 8 BUG-2012 Bearing
*F 8 CON-1029 Washer, 5/16 x 0.015
*G 2 FMD-1083 Dowel Pin, 1/2 x 2"
*H 1 FMD-1071 Threaded Shaft
*J 2 BUG-2848 Cam Spacer
*K 1 FMD-1072 Knob
*L 1 FMD-1026 Carriage Base
*Part of Item 6 (FMD-1022)
5
*K
*D
*J
*G
*B
*H
*F
*E
*A
1
4
A
B
*C
4
2
*L