BUG-O Systems SPB-3000 - Manual (Page 5)

5
The Pitbull SPB-3000 beveling machine is a portable milling unit designed for machining plate
edges before welding. Simple to operate, the Pitbull is effective and efficient for bevel angles from
0º to 60º and bevel width “b” up to 1.02'' (26 mm). With additional equipment it can be used for
angles up to 80º.
Before starting operation, read this manual carefully
and pay particular attention to safety conditions.
STANDARD SPB-3000 SET
The standard set includes:
- Carriage mounted on one rail segment
- Rail
- Complete milling unit – ready to operate
- Milling unit holders (0 + 22.5 + 37.5 + 45º)
- Rail alignment clamp x 3
- Allen wrench hex s=6
- Allen wrench hex s=8
- Insert key – t 15
- Spare machining insert x 3
- Instruction and Parts Manual
GENERAL INFORMATION
Figure 1: Reference drawing showing Bevel Angle ( ß ),
Bevel Face Width (b), Bevel Depth (d) and Depth of Cut (c).