BUG-O Systems Programmable Gantry System - Manual (Page 17)

17
PGS-1000-8,-10,-12 PROGRAMMABLE GANTRY SYSTEM PARTS LIST
ITEM QTY PART NO. DESCRIPTION
1 2 BUG-2785 Carriage, 36"
2 1 BUG-2975 Cable Mounting Assembly
3 1 BUG-5250 Carriage, 12"
4 1 BUG-5285 H. D. Cutting Group (optional)
5 1 BUG-6050 Hand Held Pendant
6 2 MUG-1050 Column Base
7 2 MUG-1053 Column
8 1 MUG-1410-8 Face Rail Assembly 8 ft.
-10 Face Rail Assembly 10 ft.
-12 Face Rail Assembly 12 ft.
9 3 MUG-1590-E Drive Unit (100:1) 4-80 ipm
10 3 MUG-1595 Encoder
11 3 MUG-1621-1.5 Cable 18"
12 1 MUG-1633-3 Shielded Cable 3' (X1)
13 2 MUG-1633-12 Shielded Cable 12'(X2, Y)
-14 Shielded Cable 14' (X2,Y)
-16 Shielded Cable 16' (X2,Y)
14 1 MUG-1678 Cable Carrier (8', 10' or 12') ft
15 1 MUG-1680 XXY Gantry Control Box 120 VAC
MUG-1682 same as above except 240 VAC
16 1 MUG-1685 Cable Carrier Mount
17 1 ARR-1080 H.D. Rigid Rail, 8' (ordered separately)
TECHNICAL DATA
Gantry Control Box MUG-1680 120 VAC/50-60 Hz/1
Power Requirements: MUG-1682 240 VAC/50-60 Hz/1
Travel Speed: 4-80 in/min (100-2000 mm/min)
Maximum Segment
Dimension: 72" (1800 mm) Within Limits of Travel
Minimum Dimension
Increment: Inches: 0.01" Metric: 0.1 mm
Delay Increment: 0.01 seconds
Maximum Delay 99.99 seconds