Broadata Communications 300E Series - Manual (Page 17)

BCI 300E User’s Manual
Multiple Channel Video/Audio/Data Transmission System
Broadata Technical Support, (800) 214-0222 18
3. If the POWER indicator and Optical Link indicator are
ON, but the audio/video channels are not operating,
then:
a. Check to see that the attached user equipment is turned
on.
b. Both ends of the link are connected to the corresponding
equipment and to the same corresponding channel port.
c. Cable connections at both the video/audio channels
are securely fastened to each connector. Turn the power
off, then back on to reset the link.
d. Output levels of the user’s video and audio sources are
not above the allowed input levels of the 300E units
(see Section 5.0 Specifications).