Broadata Communications 300E Series - Manual (Page 14)

BCI 300E User’s Manual
Multiple Channel Video/Audio/Data Transmission System
Broadata Technical Support, [email protected] 15
2.3 AC Power Connection
Congratulations! You are now ready to power up the BCI 300E and set
up your network connection. In order to make sure that you have a
proper installation, please observe the following:
1. Your AC jack has power.
2. Your electrical system has proper grounding (this ensures that
your power supply does not suffer from voltage variations).
3. Power Surge Protection. This is optional, but highly
recommended. A UPS system provides voltage regularity as
well as prevents spikes from occurring, thus protecting your
300E from sensitive voltage conditions.
The 300E derives power from an internal power supply. This power
supply is a 110-240 VAC, 50-60 Hz, at 2.2A. This power supply comes
standard for the 300E unless otherwise specified.
To provide power to the 300E, simply connect the power cord, already
provided with the units, and connect it to the wall jack. (You will find one
power cord per unit). Once the power cord has been connected to the
wall jack, connect the other end of the cord to the unit and turn the
switch on (I).
If you have any problems or concerns, regarding the installation, make
sure that you have taken the proper steps to ensure a proper power
connection. Otherwise, feel free to contact us for any questions you
may have.