Broadata Communications 285E Series - Manual (Page 15)

BCI 285E User’s Manual
Digital Fiber Optic Audio/Data Transport System
Broadata Technical Support, (800) 214-0222 16
The 285E derives power from an external 12VDC power supply. This
power supply is a wall mounted AC/DC adapter, 100-240 VAC, 50-60 Hz,
at 1A. This power supply comes standard for the 285E unless otherwise
specified.
To provide power to the 285E, simply connect the power cord, already
provided with the units, and connect it to the wall jack. (You will find one
power cord per unit). Once the power cord has been connected to the
wall jack, connect 12VDC to the unit and the unit should power up
immediately.
If you have any problems or concerns, regarding the installation, make
sure that you have taken the proper steps to ensure a proper power
connection. Otherwise, feel free to contact us for any questions you
may have.
3.0 OPERATION
After the installation procedure is completed, the units are ready for
operation. To operate the BCI 285E units, simply apply power as
indicated in the previous step. Note that the front panel link status
indicator, shown in Table 2, will be activated.
Table 2
Status Indicators
Note:
1 - On previous rev unit
audio input and
output activity is
indicated by a single
LED labeled AUD.
2 - On previous rev unit
data input and output
activity is indicated
by a single LED
labeled DATA.
This GREEN LED indicates L/R input
audio activity
This GREEN LED indicates L/R output
audio activity
This GREEN LED indicates input data
activity
This GREEN LED indicates output data
activity
This GREEN LED indicates optical link
is present and established
This RED LED indicates that power
is present
Audio In * 1
Audio Out * 1
Data In * 2
Data Out * 2
LINK
POWER
L
R
IN
OUT
LINK
PWR
Label Function Description