Broadata Communications Mini-HDMI-AD Series - Manual (Page 11)

BCI Mini-HDMI-AD User’s Manual
Miniature Multimode Fiber Optic HDMI Transmission System
Broadata Technical Support, (800) 214-0222 12
2.2.1.4 Remote IR Control
The Mini-HDMI-AD has an optional configuration for remote IR
cotnrol (Mini-HDMI-AD-IR). In this option, one external IR emitter
and one external IR receiver are included (see Figure 2-6). To
activate the remote IR control, plug the IR emitter and IR receiver
into the IR port of the Mini-HDMI-AD-R-IR unit and
Mini-HDMI-AD-T-IR unit, respectively. Please note that once the
IR emitter/receiver is plugged into the Mini-HDMI-AD unit, the
channel 2 of the RS-232 serial data (refer to Section 2.2.1.3)
will be de-activated and the RS-422 will no longer operate.
2.2.2 Optical Fiber Connection
Most cable manufacturers identify individual fibers in the fiber
cable. Select an appropriate terminated fiber. Each unit’s optical
ports in the system are specified for use with Multimode
(62.5/125 micron) fiber. Follow the ensuing instructions on
installing and connecting the fiber optic links:
1. Ensure the power is off before proceeding with the fiber
optic cable installation.
Figure 2-6
IR Emitter and one External IR Receiver
IR Emitter IR Receiver