Broadata Communications Mini-DVI-AD Series - Manual (Page 12)

Mini-DVI-AD User’s Manual
Miniature Multimode Fiber Optic DVI Transmission System
Broadata Technical Support, [email protected] 13
2. Prior to connecting the fiber optic cables, remove and save
the dust caps from the optical port of both the Mini-DVI-AD
units. Clean the fiber optic connector and use a lint-free
cloth dampened with alcohol to thoroughly wipe the side
and end of the ferrule.
3. Connect the fiber from one unit to the other connecting the
near end Mini-DVI-AD-T unit’s optical port to the far end of
the Mini-DVI-AD-R unit’s optical RX port as illustrated in
Figure 2-7.
Figure 2-7
Fiber Optic Connection
DVI
OPTICAL PORT
DVI
OPTICAL PORT