Broadata Communications Mini-DVI-AD Series - Manual (Page 10)

Mini-DVI-AD User’s Manual
Miniature Multimode Fiber Optic DVI Transmission System
Broadata Technical Support, [email protected] 11
RS-422 differential serial data
The Mini-DVI-AD transmits one (1) channel of differential data
signals compatible with Full Duplex RS-422 electrical signals.
Note that RS-422 option is factory set and is not a standard
configuration. The RS-422 does not support handshaking
control signals. Use the following steps for RS-422
transmission.
1. For the near-end, label and connect one data cable to the
user’s RS-422 device.
2. Connect the other end of this cable to the front panel RS-422
terminal block connector on the Mini-DVI-AD (see Figure 2-5).
Figure 2-5
RS-422 Terminal block pinout
1
O
2 1 2
D
A
I
GND + _ + _