Broadata Communications LBC-HDBT - Manual (Page 5)

LBC-HDBT User’s Manual
Link Bridge
TM HDbaseT HDMI Transmission System
Broadata Technical Support, (800) 214-0222 6
2.0 OPERATION CONTROLS AND FUNCTIONS
2.1 Transmitter Front and Rear Panels
1. HDMI In: Connect to HDMI source equipment such as a DVD or
Blu-ray player.
2. LAN: Connect to an internet or network connection.
3. RS-232 In: Connect to a PC or laptop with D-Sub 9 pin male
cable for the transmission of RS-232 commands.
4. Power LED: This blue LED will illuminate when the device is
connected to a power supply.
5. DC 24V: Plug the 24 V DC power supply into the unit and connect
the adaptor to an AC outlet. Only one side of power needs to be
connected to activate both transmitter and receiver.
6. IR 1 Blaster: Connect to the supplied IR blaster cable for IR
signal transmission. Place the IR blaster in direct line-of-sight of
the equipment to be controlled.
7. IR 2 Extender: Connect to the supplied IR receiver cables for IR
signal reception. Ensure that remote being used is within the
direct line-of-sight of the IR extender.
ETHERNET HDMI-IN LBC-HDBT-TX
RS-232
1 2
3
LINK
HDBT
OUT IN
IR PWR
+24VDC
4
5 6 7
8 9
Front
Rear