Brinly PCT-17 BH Cu. Ft. Utility Cart - Manual (Page 9)

L-1821 Rev. E 9.
15
3/4", Machine Bushing
Qty. 6
14
Retaining Ring, E-type
Qty. 2
Figure 6.
21
Wheel Spacer
Qty. 2
21
15
15
14
6a. To install wheels, assemble parts on to axle
(20) as follows: Wheel Spacer (21),then
Bushing (15), Wheel (19), Bushing (15) and
Retaining Ring (14).
Note: Install the wheels so that the grease
fitting faces out.
6b. Use pliers to snap retaining ring (14) in to
groove on axle (20). Two extra bushings (15)
are also provided in case you need to take up
end play on Axle (20).
6c. Wheels come without grease in them!! Use
a grease gun to lubricate wheels and axle
assembly prior to use. Pump grease until
grease starts coming out around bearing either
inside hub or outside hub.
14
20
Install Wheels